Code 3 ARCH Beacon, Руководство по установке и эксплуатации

Страница: 9 / 12

9
Maintenance:
The beacons are designed to be maintenance free. Refer to the guide below for help with troubleshooting.
Should the unit be diagnosed as malfunctioning, remove unit and replace with a new beacon.
TROUBLESHOOTINg
Problem Probable Cause Remedy
Beacon does not activate a. No power to unit a. Check wire for loose connection
b. Power input wire reversed b. Reverse power wires
c. Damaged or shortaged cabling c. Check cables for damage
d. Defective beacon d. Replace beacon module
Beacon is constantly ON (not
flashing)
a. Pattern select wire permanently
grounded or shorted to GND
a. Avoid permanent grounding of
pattern select wire
LED beacon housings may become hot with extended use. Allow beacons to cool completely
before attempting to remove.
WARNING!