TN652 CI-RC-4M-G2 Multiple Link Controller
MT-4 Radio Systems
TECHNICAL NOTES
Page 5 of 10
CODANCOMMS.COM
TECHNICAL NOTE:
TN652, REV 3-0-0, © Nov 2018
CANADA/US
+1 250 382 8268
| TOLL FREE
+1 800 664 4066
Analog Audio Bridging Circuit:
The CI-RC-4M-G2 controller is equipped with a 4 way analog audio bridge. This audio bridge allows the user to
interconnect RF modules using an analog audio interface similar to the AC-3E and BC-4E products. It allows the
user to interconnect up to four RF modules modules as well as an auxiliary audio input and output.
On the multi-link controller there is an audio adjustment pot for each audio path available. The block diagram on the
next page (see Figure 6) shows the audio routing and audio pot adjustments.
To enable a specifi c audio path, the appropriate audio jumper must be removed. For the specifi c audio jumper
required for enabling the appropriate audio path, refer to the jumper table below:
JU53
RXA to TXA Audio Disable
JU63
RXC to TXA Audio Disable
JU59
RXA to TXB Audio Disable
JU70
RXC to TXB Audio Disable
JU54
RXA to TXC Audio Disable
JU64
RXC to TXC Audio Disable
JU58
RXA to TXD Audio Disable
JU68
RXC to TXD Audio Disable
JU52
RXB to TXA Audio Disable
JU65
RXD to TXA Audio Disable
JU57
RXB to TXB Audio Disable
JU71
RXD to TXB Audio Disable
JU51
RXB to TXC Audio Disable
JU66
RXD to TXC Audio Disable
JU56
RXB to TXD Audio Disable
JU69
RXD to TXD Audio Disable
JU55
RXA to Aux Audio O/P Disable
JU50
RXB to Aux Audio O/P Disable
JU62
RXC to Aux Audio O/P Disable
JU67
RXD to Aux Audio O/P Disable
To enable COR-PTT routing of the signal, the following jumpers must be installed:
JU23A
COR A to PTT A Enable
JU25A
COR A to PTT C Enable
JU23B
COR B to PTT A Enable
JU25B
COR B to PTT C Enable
JU23C
COR C to PTT A Enable
JU25C
COR C to PTT C Enable
JU23D
COR D to PTT A Enable
JU25D
COR D to PTT C Enable
JU24A
COR A to PTT B Enable
JU26A
COR A to PTT D Enable
JU24B
COR B to PTT B Enable
JU26B
COR B to PTT D Enable
JU24C
COR C to PTT B Enable
JU26C
COR C to PTT D Enable
JU24D
COR D to PTT B Enable
JU26D
COR D to PTT D Enable