Codan 8525B Series, Руководство пользователя

Страница: 111 / 189

Using tone call
8-6 Outback HF Radiophone
Enabling a channel for tone calling
This procedure explains how to enable a channel for tone calling. Initially, you need
to select a channel frequency you want to enable, and then choose a tone call pair for
that frequency.
You can copy this information into the P-channel program.
This procedure is similar to Enabling a channel for selective call in section 5. Once
in the set-up mode, you can skip through the non-important steps by pressing the
Enter button.
The displays in this section will vary depending on the channel you select (ie the word
inhibit may be replaced with a frequency number).
Step Action… Display shows… Remarks…
1. Use the Select
Channel or
Channel and
buttons to
find the channel
you wish to
enable.
An example for channel
29.
Refer to section 4,
Selecting channels.
2. Press
Enter
You will hear a ’pip’.
3. Press
Enter
You will hear a ’pip’.
F