Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133
Email:
www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual
January 2006
Figure37
ee
Figure 38
Select a leader board and sled of the same
thickness and set the roller gap (1/16” less
than sled thickness) as defined in previous
sections for setting Roller Gap, Alignment
and Pressure.
Peel back the release liner and drape the
laminate over the rollers. Push the leader
board in between the rollers causing the
laminate to go with it. Feed the leader board
through until the trailing edge is about in the
middle of the feed tray, then stop the
laminator.
Laminating with the Heavy Duty Roll Feed (continued)
Now butt the leading edge of the sled up to
the trailing edge of the leader board and
laminate the print.
