EN
G
LI
S
H
11
Display light (illumination)
1. Press
to switch the distance meter on.
2. Hold in
and
simultaneously for 2 sec to switch the display light on/off.
“ILLU On” or “ILLU Off” shows on the display.
Keypad lock
1. Press
to switch the distance meter on.
2. Hold in
and
simultaneously for 2 sec to switch the keypad lock on/off.
“KEY LOCK On” appears on the display and the distance meter shuts off.
3. To switch the distance meter on when the keypad lock is on: Press
,
the message “PRESS MINUS” will appear on the display. Press
within
2 sec to switch the distance meter on.
Single distance measurement
1. Press
to switch the distance meter on.
2. Aim the laser beam at the target point.
3. Press
, the measured length will appear
on the display.
Continuous length measurement
1. Press
to switch the distance meter on.
2. Hold in
for 2 seconds.
3. The distance meter measures continuously. Uses include e.g.:
-
Horizontal distance measurement (min value)
-
Measuring room diagonals (max values).
Place the distance meter on a tripod and rotate
it to measure from corner to corner. Add the two
measurements together using the addition function
(see below).
The maximum and minimum distances measured are displayed as “max” and “min”.
The last value measured is displayed on the main line.
