EN
G
LI
S
H
3
Impact Wrench
Art.no 40-8726
Model IW1000B
Please read the entire instruction manual before using the product and then save it for
future reference. We cannot be held responsible for any text or picture errors or changes
to technical data. If you experience any technical problems or have any other questions,
please contact our Customer Services (for address details, please see back page).
Safety
General safety instructions for power tools
Warning!
Read all the instructions. Failure to adhere to the following instructions may
lead to electric shocks, fires and/or serious injury. The term “power tools” in the warning
text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a)
Keep the work area clean and well illuminated.
Cluttered and poorly lit areas
invite accidents.
b)
Do not use power tools in explosive environments, e.g. near to flammable liquids,
gases or dust.
Power tools generate sparks that can easily ignite dust or fumes.
c)
Keep children and other bystanders away from the area where you are using
the power tool.
Distractions can cause you to lose your concentration and control.
2) Electrical safety
a)
The power tool’s plug must fit correctly into the wall socket. Never modify
the plug in any way. Never use an adaptor together with earthed power tools.
Unmodified plugs and suitable wall sockets minimize the risk of electric shocks.
b)
Avoid physical contact with earthed objects such as pipes, radiators, ovens
and refrigerators.
There is an increased risk of receiving an electrical shock if your
body is earthed.
c)
Do not expose the power tool to rain or other wet conditions.
If water gets
inside it increases the risk of electric shock.
d)
Do not abuse the mains lead. Never use the lead to carry the tool or pull
the plug from a wall socket. Keep the lead away from heat, oil, sharp edges
and moving parts.
Damaged or tangled leads increase the risk of electric shock.
e)
When using power tools outdoors, use an extension lead that is suitable for
this purpose.
The use of an extension lead designed for outdoor use decreases
the risk of electric shocks.
f)
If the use of the power tool in a wet environment is unavoidable, a wall
socket equipped with a residual current device (RCD) should be used.
Using an RCD significantly reduces the chances of you receiving an electric shock.
