EN
G
LI
S
H
13
Operating instructions
Setup
1. Adjust the length of the telescopic shaft (6)
to suit your height. Twist the locking knob (7)
clockwise to release the shaft, adjust
the length and then twist the locking knob
anticlockwise to tighten.
2. Adjust the angle of the trimmer head
by holding in the button (4) and moving
the head to one of the 5 settings. Release
the button when the trimmer head is at
the desired setting.
3. The trimmer head can be rotated and set
to one of 3 fixed settings. Slide the spring-
loaded catch (5) forward towards the trimmer
head, twist the trimmer head into one of its
fixed settings and then release the catch.
Switching the trimmer on
1. Hold down the safety switch (11) on the rear handle.
2. Start the trimmer by pressing in the power trigger (10).
3. Release the power trigger to stop the motor.
