STEP I. ATTACH MOUNTING CLAMP TO THE
LAMP ARM (Figure 2).
1. Remove the two
A
thumbscrews and the
cover from the mounting clamp.
2. Insert the lamp arm into the mounting
clamp assembly and replace the cover and
thumbscrews.
STEP II. MOUNT THE LAMP ONTO THE PIANO
BOARD OR MUSIC STAND (Figure 2).
1. Loosen the two
B
thumbscrews.
2. Mount the mounting clamp onto a
piano board or a music stand. NOTE:
You may have to manually adjust the opening
of the mounting clamp if you have a
thinner/thicker piano board or music stand.
3. Tighten the two
B
thumbscrews.
STEP III. PLUG IN THE ADAPTER CONNECTION
INTO THE BOTTOM OF THE LAMP ARM (Figure 3).
STEP IV. PLUG THE POWER ADAPTER INTO
A WALL OUTLET.
STEP V. LIGHT CONTROLS: THE ON/OFF TOGGLE
SWITCH IS PRE-INSTALLED ON THE LAMP
SHADE. SIMPLY TOGGLE THE TOGGLE SWITCH
TO TURN THE LAMP ON OR OFF.
(Figure 1)
(Figure 2)
(Figure 3)
swivel joint
switch
A
thumbscrew
B
thumbscrew
mounting bracket
cover
power
adapter
LAMP USAGE
COPYRIGHT © COCOWEB.COM, INC. 2014
The information contained in this document is subject to change without notice.
COCOWEB.COM, INC.
42 Corporate Park, Suite 250
Irvine, CA 92606
Phone: 1-888-783-0378
co
co
web
TM
www.cocoweb.com
