Cocoon HE200074, Руководство по установке

Страница: 11 / 22

Floodlight Camera
11
1300 663 907
After Sales Support
help@cocoonproducts.com.au
www.cocoonproducts.com.au Model number: HE200074
10/2021
Installation
• MUST BE INSTALLED BY A LICENSED ELECTRICIAN.
• SHUT OFF POWER AT THE MAIN SWITCH BOARD BEFORE INSTALLING.
• Turn off power to your Floodlight circuit at the main switch board to
ensure no power is being sent.
• BEFORE INSTALLATION, PLEASE CHECK THAT THE LOCATION OF THE
SMART DEVICE IS WITHIN RANGE OF YOUR HOME WIFI & THE SIGNAL
IS STRONG.
• IMPORTANT SAFETY ISSUES
• Ensure the power is disconnected before installing.
• Modification of this product will void any warranty.
• When drilling into walls and ceilings, care must be taken to ensure you
do not damage electrical wiring & other hidden utilities.
NOTE:
• Position of the Smart Floodlight Camera must be in strong WiFi range and no
higher than 3 meters
• Prior to installation, we recommend having an electrician powering
on the Floodlight Camera so you can confirm it works properly in your
chosen location. Balco Brands will not be held liable for a device not
connecting reliably due to improper installation location
1. Find a suitable position for your Smart Floodlight Camera
NOTE:
• An IP rating of IP44 is only suitable for external walls with supplementary
protection such as overhanging eaves.
• The IP rating of this product is only valid when
installed on a flat and non-porous surface. Additional
sealing may be required for irregular surfaces.
2. Mark mounting holes using bracket (A) as a
template.
3. Drill mounting holes and insert Rawl plugs (B)
if necessary and secure bracket (A) to wall with
supplied screw (C).
4. Attach the Smart Floodlight Camera to the bracket
and secure with fixing screws.
5. The Smart Floodlight Camera needs to be
connected to the mains power supply. To ensure
this is done correctly, match earth, neutral & live
cords separately as per diagram below.
NOTE:
• MUST BE INSTALLED BY A QUALIFIED ELECTRICAL CONTRACTOR
• The power cord must be kept away from any moisture & conductive parts
6. You can adjust the direction of the lamps by loosening the bolts. Point in
desired direction then tighten the bolts to secure the lamp heads in place
Setup
a
b
c
N
L
To
Floodlight
Camera
To
Mains