Cocoon HE170703 страница 27 Скачать руководство пользователя

Страница: 27 / 38

AFTER SALES SUPPORT

1300 663 907

[email protected]

MODEL: HE170703

SERVICING

5.1 Servicing your ModelMaker 3D Printer

5.1.1 Replacing the Print Mat

The ModelMaker 3D Printer includes 2 x extra Print Mats. Additional Print Mats are available for
purchase from

https://cocoonproducts.com.au

Remove the current Print Mat by slowly peeling from one corner

Using rubbing alcohol and a microfiber towel, carefully remove any residual adhesive left on
the Print Bed

Peel the 3M backing from the new Print Mat

Gently place the new Print Mat onto the Print Bed, making sure to align with each edge. It is
recommended to start at a corner to ensure no bubbles become present

Use the Scraper to apply pressure on the new Print Mat, ensuring strong adhesion. Keep the
Scraper level as it can damage the Print Mat

TIP:

You can also use masking tape in lieu of a Print Mat. Blue painters tape is recommended.

5.1.2 Nozzle Cleaning

If your Extruder nozzle becomes blocked, follow these steps to clean the nozzle.

Remove the existing filament using the steps in

Quick Settings Change Filament

Remove Filament

Using a clean 0.4mm drill bit, insert the drill bit into the nozzle by hand, twisting while
inserting

WARNING:

The extruder is preheated and hot

Remove the drill bit from the nozzle, twisting while removing

Repeat steps ‘2’ and ‘3’ three times, then follow the steps in

Quick Settings Change

Filament Add Filament

Содержание HE170703







































Результаты поиска

Содержание HE170703

Отзывы:

Похожие инструкции для HE170703

Бренды по названию

Популярные бренды

Cocoon HE170703, Инструкция по эксплуатации

Результаты поиска

Содержание HE170703

Отзывы:

Похожие инструкции для HE170703

Бренды по названию

Популярные бренды