Cocoon HE170703 страница 23 Скачать руководство пользователя

Страница: 23 / 38

AFTER SALES SUPPORT

1300 663 907

[email protected]

MODEL: HE170703

4.5 Quick Settings

To access the Quick Settings, press the Dial Button and select Quick Settings in the Main Menu

Move:

•

Move X, Y, Z:

Manually move the X, Y, Z axes by 1mm increments

•

Extruder:

Manually extrude or retract filament by 1mm increments

IMPORTANT NOTE:

you must preheat the extruder to extrude or retract filament, 180ºC minimum

•

Home XYZ:

Return to the home position in the front right corner

Change Filament:

•

Add Filament:

On screen guide to to Add Filament if no filament is currently inserted

•

Remove Filament:

On screen guide to remove filament if currently inserted

•

Preheat:

Preheat the nozzle

•

Raise Extruder 10mm:

Raises the extruder by 10mm

Disable Steppers:

Disables all motors so you can manually move the bed and extruder position in

the X and Y directions

Preheat:

Preheat the nozzle

Cooldown:

Cools the nozzle

4.6 Advanced Settings

To access the Advanced Settings, press the Dial Button and select Advanced in the Main Menu.
Unless you are an experienced user we do not recommend adjusting settings in the Advanced
Menus.

Temperature:

•

Nozzle:

Set the current temperature of the nozzle (0-250⁰C)

•

PID-P:

Proportional Response

•

PID-I:

Integral Response

•

PID-D:

Derivate Response

•

Preheat PLA conf:

Adjusts the default PLA heating temperature

Save Setting:

Saves the current settings

NOTE:

You must save settings after every change. Unsaved settings will be lost after restart

Factory Reset:

Restores default factory settings

PRINTING AND REMOVING MODELS

Содержание HE170703







































Результаты поиска

Содержание HE170703

Отзывы:

Похожие инструкции для HE170703

Бренды по названию

Популярные бренды

Cocoon HE170703, Инструкция по эксплуатации

Результаты поиска

Содержание HE170703

Отзывы:

Похожие инструкции для HE170703

Бренды по названию

Популярные бренды