9
info@
cocoonfires
.com
www.
cocoonfires
.com
TERRA - STANDING MODEL INSTALLATION & ADJUSTMENTS
NOTE:
The Cocoon Terra may only be used on a load bearing surface. The standing
model may not stand on any movable surfaces and may not be moved while there is a
flame present in the Combustion Chamber and may not be moved when in a hot state.
The surface on which the
Legs
stands must be a rigid surface that is flat, level and secure.
hex
nut
hex
nut
With the
Legs
securely
attached to the Main
Body
, place the
Removable Tray Bracket
over the threaded stud
at the base of the
Main
Body
, and then tighten in
place with the hex nut
supplied to be
"finger
tight"
. Now follow the
adjustment procedures
on the following pages
before securing with an
appropriate tool.
Screw the three
Legs
from the
bottom of the
Main
Body
and secure
Legs
from the inside
of the
Main Body
with the three hex
nuts.
