TMT-502 REMOTE CONTROL WITH TIMER
14
•
Remove the battery from this product if it will not be used for an extended period.
•
Do not attempt to repair this product. If the product is damaged or if you are in doubt about the proper
operation, take the product back to the place of purchase.
•
Never use COCO products for life support systems or other applications in which equipment
malfunctions can have life-threatening consequences.
•
Do not use the product in damp areas. Clean the device with a clean cloth.
Power
•
Replace the 12 V alkaline battery if the transmit indicator no longer lights when the ON or OFF button is
pressed.
•
Replace the flat 3 Volt battery when the low-battery indicator appears on the screen. This will erase the
timer memory. After you do this, program the remote control and the timer again.
•
Only use a 3 Volt CR2032 lithium battery and a 12 Volt A23 alkaline battery.
•
Do not throw the batteries into an open fire.
•
Respect the local regulations when disposing of batteries.
Wireless
•
This product works using a radio signal that passes through walls, windows and doors. The range is
maximum 75 metres in the open air. The range indoors is strongly influenced by local conditions such
as concrete, glass and metals. On average, the indoor range is approximately 30 metres.
•
New double glass often includes a thin metallic layer. This type of glazing (“
HR glass
”) allows most
visible light to pass through but has a negative impact on radio signals. If there is HR glass between the
transmitter and receiver, you should expect a significant reduction of the range of the wireless signal.
•
This product operates at a frequency of 433.92 MHz. It complies with the essential requirements and
other conditions of R&TTE Directive 1999/5/EC and can be used in all EU countries.
•
There may be restrictions on the use of this device outside the EU. If this device is used outside the EU,
check whether the device complies with the local directives.
