PIR-2050 WIRELESS MOTION SENSOR
12
Power
•
When some time has passed, if the concerned receiver no longer responds when the sensor should
detect motion, replace the battery.
•
Use only 1.5 Volt AAA alkaline batteries.
•
Do not throw the batteries into an open fire.
•
Respect the local regulations when disposing of batteries.
Wireless
•
This product works using a radio signal that passes through walls, windows and doors. The range is
maximum 75 metres in the open air. The range indoors is strongly influenced by local conditions such
as concrete, glass and metals. On average, the indoor range is approximately 30 metres.
•
New double glass often includes a thin metallic layer. This type of glazing (“
HR glass
”) allows most
visible light to pass through but has a negative impact on radio signals. If there is HR glass between the
transmitter and receiver, you should expect a significant reduction of the range of the wireless signal.
•
This product operates at a frequency of 433.92 MHz. It complies with the essential requirements and
other conditions of R&TTE Directive 1999/5/EC and can be used in all EU countries.
•
There may be restrictions on the use of this device outside the EU. If this device is used outside the EU,
check whether the device complies with the local directives.
This product complies with the essential requirements and other relevant provisions of the applicable
European directives. The Declaration of Conformity (DoC) is available at www.coco-technology.com.
If possible, submit this product for recycling after use. Do not dispose of the product with household trash.
