PIR-2050 WIRELESS MOTION SENSOR
Remarks
Reminders
•
This product must be used in combination with at least one COCO receiver. The wireless system can
be expanded indefinitely with other COCO remote controls and/or receivers.
•
This product is a motion sensor (transmitter) for the wireless control of one or more receiver(s) when
the built-in sensor detects motion.
•
Consider objects such as trees or bushes within the detection range. When moved by wind or birds, the
detector will respond to the unintended motion.
•
This product can be used both with receivers with a manually set house code and those in which the
code is set automatically.
•
This product is splash-water resistant and can be placed outdoors under normal weather conditions as
long as the tab (under the protection cover) and the seal ring (between the cover and the housing) are
positioned properly.
•
Be aware that the light level is lower during cloudy or rainy weather. This influences the measured light
level.
•
If the product does not work or does not work properly:
- Check the correct placement and/or function of the batteries (replace if necessary).
- Check step for step whether the concerned receiver is programmed correctly.
- The chance that someone else nearby is using the same house code is extremely small. Nonetheless,
to be sure, set the system to a different house code by repeating
[7]
,
[8]
or
[9]
.
Safety instructions
•
Do not expose this product to excessive heat, direct sunlight or moisture.
•
Remove the batteries from this product if it will not be used for an extended period.
•
Do not attempt to repair this product. If the product is damaged or if you are in doubt about the proper
operation, take the product back to the place of purchase.
•
Never use COCO products for life support systems or other applications in which equipment
malfunctions can have life-threatening consequences.
11
