Coccolle Nerio, Руководство пользователя

Страница: 27 / 43

2.It will fit vehicle with positions approved as FIX positions(as detailed in the
vehicle handbook). depending on the category of the child seat and of the
fixture.
Group 0,I
Group I, II, III
3.The mass group and the FIX size class for which this device is intended is:
Rearward facing Group 0, Class E ; Group I, Class D
Fix+Vehicle safety belts Installation
Rearward Facing ; Top Tether Installation
Warning
1.This is an FIX CHILD RESTRAINT SYSTEM. It is approved to Regulation
No.44/04 series of amendments, for general use in vehicles fitted with FIX
anchorage system.
This child restraint is classified for "(Semi-universal)" use and is suitable for
fixing into the seat positions of the following cars:
EN
CAR FRONT REAR
Outer Centre
Yes Yes No
Seat positions in other cars may also be suitable to accept this child restraint.
Please refer to the information documents or the retailer’s website for the
suitable car model list. If in doubt, consult either the child restraint manufacturer
or the retailer any time.
1. This is a "Universal" child restraint. It is approved to Regulation No. 44/04
series of amendments, for general use in vehicles and it will fit most, but not all
car seats.
3. This child restraint has been classified as "Universal" under more stringent
conditions than those which applied to earlier designs which do not carry this
notice.
Warning: Before use our product, please read the instruction manual
carefully. The product is a safety product and only safe when used in
accordance with the instruction manual.
Vehicle safety belts Installation
Group 0, I, II, III
2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle
handbook that the vehicle is capable of accepting a "Universal" child restraint for
this age group.