Coccolle Nerio, Руководство пользователя

Страница: 30 / 43

safest place to mount the safety seat. This safety seat has to be installed in a
forward-facing position. Do not mount it in sideways or in a rearwardfacing way.
In case of any doubts regarding installation of the safety seat, please contact
your vehicle dealer. You can use your child car seat as follows:
(Fig. 3) As far as children aged 0-12 are concerned, vehicle's back seats are the
EN
Not allowed to install child car seat
Safe to install child car seat if there is 3-point belt
Be careful to install child car seat. Installation is permitted only if there is
3-point belt. The seat may not be installed in the area of effect of an airbag.
Choose the Installation method
Choose the Installation method According to the child's weight (Fig. 4, 5)
Group 0/I Rearward facing
Group I/II/III Forward facing
For Group 0/I, you can choose vehicle safety-belts or ISOFIX installation, refer
to child's weight.
use the Top tether anchorage. you can use the FIX anchorages.
- Open the harness buckle, then place the harness straps to the sides of the car
seat. Put the baby into the car seat
possible
Group I Forward facing
Grasp the seat body to check the seat if it is fastened tightly or shakes.
- Push the FIX Interface into the anchorages until heard an audible sound“click”.
(a green mark will turn up on the button, Make sure that is seamless between
the seat body and vehicle seat)
Use the 5-point buckle (Fig. 7)
- Press the FIX release button and push the FIX connectors forward as far as
If the seat shakes and the FIX connectors are pulled out, please repeat the
above steps and install it again.
Group II/III Forward facing
For Group 0/I Rearward facing with ISOFIX, There are 3 anchorages,please
make sure they are all fixed. For Group I/II/III Forward facing with FIX, do not
Group 0/I Rearward facing
- Loosen the harness straps by pressing the release button and pulling the
- find the FIX anchorages on vehicle seat,install the FIX guide sleeve
harness straps as far as you can.
Use the FIX (Fig. 6)
- Slide buckle tongues together and then insert them in the buckle