Coby COBY KCD150, Инструкция по эксплуатации

Страница: 15 / 80

Page 14 Coby Electronics Corporation www.cobyusa.com Page 15
Engl
ish
Clock Mode
Using the Alarm Clock
Setting the Alarm Timers
Set one or two independent alarms to wake at different
times.
To set the Alarm 1 timer:
Make sure the unit has been turned off (the POWER 1.
ON INDICATOR [4] should be dark).
Press AL 1 [12]. The AL1 INDICATOR [22] will light and
2.
the display will flash the Alarm 1 time.
Press SKIP UP/HOUR [9] to adjust the hour; press SKIP
3.
DOWN/MINUTE [10] to adjust the minutes.
Press AL 1 [12] again to save the Alarm 1 time. The
4.
AL1 INDICATOR [22] will remain on; the unit will now
sound at the set time.
To set the Alarm 2 timer, follow all of the steps above, but
press AL 2 [16] instead of AL 1. When the Alarm 2 timer has
been set and is active, the AL2 INDICATOR [6] will light.
Setting the Alarm Mode (Wake to Radio, CD, or
Buzzer)
Set the FUNCTION SWITCH [27] to the “AM” or “FM”

position to wake to the radio. Turn the VOLUME
KNOB [2] to adjust the volume to the desired level.
Set the FUNCTION SWITCH [27] to the “CD” position

to wake to a CD. Turn the VOLUME KNOB [2] to adjust
the volume to the desired level.