Cobra PR 255 VP, Руководство пользователя

Страница: 10 / 12

U Us siin ng g Y Yo ou urr R Ra ad diio o
O Op pe erra attiio on n
Speaker/Microphone/Charge Jack
•
Your microTALK ® radio can be fitted with an external
Speaker/Microphone , freeing your hands for other tasks.
This same jack also serves as the connecting point for
a wall charger/adapter.
To attach a speaker/microphone:
1.
Open the speaker/microphone/charge
tab on top of your microTALK
® radio.
2. Insert the plug into the speaker/
microphone/charge jack.
To connect a wall charger/adapter:
1.
Open the speaker/microphone/charge
tab on top of your microTALK
® radio.
2. Insert the wall charger/adapter plug
into the speaker/microphone/charge jack.
See Page 1 for batteries and charger
instructions.
microTALK ® Range
••
Your range will vary depending on terrain and conditions.
In flat, open country your radio will
operate at maximum range.
Buildings and foliage in the path of the
signal can reduce the range of the radio.
Dense foliage and hilly terrain will further
reduce the range of the radio.
On FRS Channels 8 through 14, your radio
automatically switches to low power, which will
limit the range the radio can communicate.
Remember, you can achieve maximum
range by using maximum range
extender. See page 5 for details.
R Re ed du uc ce ed d R Ra an ng ge e
R Re ed du uc ce ed d R Ra an ng ge e
M Ma ax xiim mu um m R Ra an ng ge e
Speaker/Microphone/
Charge Jack
E En ng glliis sh h
6 6
Customer Assistance Warranty Introduction O Op pe erra attiio on n
Channel Scan
••
Your microTALK ® radio can automatically scan channels.
To scan channels:
1.
Press the Mode/Power button until the
Scan icon and the channel numbers appear
on the display.
2. Press the Channel Up or Channel Down
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
The Scan icon will continue to be displayed
when scan is on . Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
While setting channel scan, if you do not press any buttons for
15 seconds your radio will automatically return to
Standby mode
on the channel or channel/privacy code displayed before you
entered mode functions.
M Mo od de e//P Po ow we err B Bu utttto on n
C Ch ha an nn ne ell B Bu utttto on n
S Sc ca an n C Ch ha an nn ne ells s
9 9 N No otth hiin ng g Comes Close to a Cobra ®