center.
*
Do not operate this tool while under the Influence of drugs, alcohol or any medication.
*
The appliance is not intended for use by young or infirm persons.
*
Young children should be supervised to ensure that they do not play with the appliance.
*
The use of an earth-leakage circuit Breaker of residual current device in conjunction with this tool is
recommended.
*
Maintain the chain saw with care. Keep clear of the chain in all times. Take care covering the chain saw with the
provided guard when carrying.
*
Chain tension. Make sure that the chain Tension is correct, as specified in these instructions. Incorrect tension
may cause the chain disengage from the guide bar, which is extremely dangerous.
2. Pole chain saw safety warnings Special safety instructions
*
Keep all parts of the body away from the pole chain saw when the chain saw is operating. Before you start the
pole chain saw, make sure the pole chain is not contacting anything. A moment of distraction while operating the
pole chain saw may cause entanglement of your clothing or body with the pole saw chain.
*
Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle. Holding
the pole chain saw with a reversed hand configuration increase the risk of personal injury and should never be
done.
*
Wear safety glasses, chainsaw helmet and hearing protection. Further protective equipment for head
，
hands
，
legs
and feet is recommended. Adequate protective clothing will reduce personal injury from flying debris or accidental
contact with the saw chain.
*
Do not operate a pole chain saw in a tree. Operation of a pole chain saw while up in a tree may result in personal
injury.
*
Always keep a proper footing and operate the pole chain saw only when standing on fixed, secure and level
surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of the pole chain
saw.
*
When cutting a limb that is under tension be alert for spring back. When the tension in the wood fibers is released
the spring loaded limb may strike the operator and / or throw the chain saw out of the control.
*
Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be
whipped towards you or pull you off balance.
*
Carry the chain saw by the front handle with the chain saw switched off and away from your body. When
transporting or storing the chain saw always fit the guide bar cover. Correct handling of the pole chain saw will
reduce the likelihood of accidental contact with the moving pole chain.
*
Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or lubricated
chain may either break or increase the chance of kickback.
*
Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss of control.
*
Cut wood only. Do not use pole chain saw for purposes not intended. For example: do not use the pole chain saw
for cutting plastic, masonry or non-wood building materials. Use of the pole saw for operations different than
intended result in a hazardous situation.
*
Causes and operator prevention of kickback may occur when the nose or tip of the guide bar touches an object,
or when the wood closes in and pinches the pole chain in the cut. Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and back towards the operator. Saw users, should take several steps to
keep your cutting jobs free from accident or injury. Kickback is the result of tool misuse and / or incorrect operating
Содержание P20X
Страница 2: ...1 2 3 4 5 6 7 ...
Страница 3: ...1Kg force Fig 1 Fig 2 Fig 6 9 Fig 7 11 10 8 Fig 4 Fig 5 Fig 3 ...
Страница 4: ...Fig 8 Fig 10 Fig 12 Fig 13 Fig 9 Fig 11 60mL ...
Страница 5: ...Fig 15 Fig 14 Fig 16 Fig 17 Fig 18 Fig 19 ...
