unexpected situations.
f)
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught in moving parts.
1.4 POWER TOOL USE AND CARE
a)
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job
better and safer at the rate for which it was designed. Switch off the power tool before making any adjustments,
changing accessories, or storing power tools, such preventive safety measures reduce the risk of starting the
power tool accidentally.
b)
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many
Accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly Maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. In accordance with these instructions, take into account the
working conditions and the work to be performed. Use of the power tool for different operations from those
intended could result in a hazardous situation.
1.5 SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
1.6) Other general warnings
*
Know your power tool. Read the owner’s manual carefully. Learn its applications and limitations as well as the
specific potential hazards related to this tool.
*
Use the right tool. Do not force small tools or attachments to do the job of a heavy duty tool. Do not use the tool
for purposes not intended.
*
Protect your lungs. Wear a dust mask if operation is dusty.
*
Do not operate in poor lighting. Use the unit only in daylight or good artificial light.
*
Remove the plug immediately if the mains or Extension lead is damaged or severed.
*
Stay alert and exercise control. Watch what you are doing and use common sense. Do not operate the tool when
you are tried. Do not rush, take care using power tools.
*
Check damaged parts. Before further use of the tool, a guard of any other part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its
operation. A guard or any other part that is damaged should be properly repaired or replaced by an authorized
service center.
*
Do not use tool if switch does not turn it on and off. Have defective switches replaced by authorized service
Содержание P20X
Страница 2: ...1 2 3 4 5 6 7 ...
Страница 3: ...1Kg force Fig 1 Fig 2 Fig 6 9 Fig 7 11 10 8 Fig 4 Fig 5 Fig 3 ...
Страница 4: ...Fig 8 Fig 10 Fig 12 Fig 13 Fig 9 Fig 11 60mL ...
Страница 5: ...Fig 15 Fig 14 Fig 16 Fig 17 Fig 18 Fig 19 ...
