Batteries
To install or replace batteries:
1.
Remove belt clip by releasing belt clip
latch and sliding clip up.
2.
Pull up on the battery door latch to
remove the battery compartment cover.
3.
Insert the supplied three AAA recharge-
able batteries (also works with non-
rechargeable alkaline batteries). Position
batteries according to polarity markings.
4.
Replace battery compartment cover and
belt clip.
• Do not attempt to charge
alkaline batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-
zinc), or rechargeable (Ni-Cd, Ni-MH,
etc.) batteries.
• The radio is not intended to be used
while being charged.
Maximum/Minimum Operating Range: -20°C to +45°C
Caution
– Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions
.
Batteries and
Charging
LCD Display
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
3 English
Battery Low Icon
Blinks when battery power level is low.
Your microTALK
®
radio has a unique circuit designed
to extend battery life. If there are no transmissions
within 10 seconds, the radio
will automatically switch to
Battery Save
mode. This
will not affect the radio’s ability to receive incoming
transmissions.
Channel Number
While in
Standby
mode or when selecting a
channel, shows current channel (1 through 8).
When adjusting the volume, shows current level
(1 through 8).
Channel/Volume Indicator
“ CH” is visible when in
Standby
mode or when
selecting a channel.
“ LE” is visible when adjusting volume.
Receive Icon
Transmit Icon
Visible when transmitting
a message.
Visible when receiving
a message.
MT245VP_ENG_MANL_.indd 3
10/21/14 4:44 PM