Cobra Electronics
UI/Functional Specification
Model: MR HH150 USA and EU Issue: Preliminary R2
8
MARINE STANDBY MODE – Continue
11) Scan Key
H / M /L and WX
- push and release to change power level, no interruption of scan. Push and
hold, exit SCAN and enter WX mode. When returning to VHF mode, display last active scanned
channel or last used standby channel if no activity during SCAN mode.
Setup / Enter
- push and release, exit scan and return to standby on last active scanned channel
or last used standby channel if no activity during SCAN. Push and hold, exit scan and enter
setup. When returning to VHF standby, display last used active scanned channel or last used
standby channel if no activity during SCAN.
Dual Watch
- push and release, exit scan and start Dual Watch. Push and hold, exit scan enter
Dual Watch program mode.
MEM / ESC
- push and release or hold, exit scan and enter MEM mode.
When returning to VHF, display last active scanned channel or last used standby channel if no
activity during SCAN.
12) Volume
Volume (left of key panel center)
–
•
Push and release to decrement volume level one step.
•
Push and hold 0.5 seconds to rapid advance volume level until minimum step.
•
Sound beep tone once when volume button is pushed.
•
Sound beep tone once at minimum step.
•
Beep tone sound level is controlled by Volume level.
Volume (right of key panel center)
–
•
Push and release to increment volume level one step.
•
Push and hold 0.5 seconds to rapid advance volume level until minimum step.
•
Sound beep tone once when volume button is pushed.
•
Sound beep tone once at maximum step.
•
Beep tone sound level is controlled by Volume level.
Volume level shall have a total of 15 steps with “0” = to the minimum and “15 = the maximum level.
While changing the volume level the two largest channels numbers shall momentarily display the
current volume level.
The volume level numeric display shall remain for 1 second after any Volume button release before
returning to display the current Marine channel.
