background image

Cobra Electronics 
UI/Functional Specification 
Model: MR HH150 USA and EU                                                                                     Issue: Preliminary R2 

 

 

14 

 

WX SETUP MODE 

 
 

From WX Standby: 

 

 

WX AUTO SCAN ON / OFF 

 

 

 

Default OFF -  

alternate SCAN 

and OFF in LCD

 

 
 
 

 

 

 

WX Icon is flashing. "SCAN" and "ON" or "OFF" are flashing alternately. 

 

 

 

 

("OFF" is the default setting). 

 

 

 

 

When WX auto search is set to "ON", Scanning starts under the following  

 

 

 

 

conditions: 

 
 

1) Unit is in Marine Standby mode. 

 

2) Unit is in Power Saver mode. 

 

3) Once every 5 seconds the unit will wake up and check all 10 weather  

 

  channels for the 1050Hz WX Alert tone. (The WX Alert tone is sent for 

 

  8 seconds.) 

 

4) If the WX Alert tone is detected, the unit will switch to the WX mode  

 

  on the WX Alert channel, sound a 1050 Hz tone, and flash the WX  

 

  Alert Icon.. 

 

5) The unit will remain on that WX channel until the user switches back to 

 

  the Marine Standby mode. 

 
 

 

 

 

Use channel UP or DOWN to change setting. 

 

 

 

   Push 

Setup

 Key to save setting and move to the next setup item. 

 

 

         

 

 

 

 

 

 

 

WX STANDBY 

 

Содержание MRHH150FLT USA Series























Отзывы: