Cobra MR HH450 DUAL, Руководство пользователя

Страница: 16 / 43

VHF Marine Radio Protocols
27
Nothing Comes Close to a Cobra
®
VHF Mode Programming
Setup Mode Programming
•
The following series of procedures is designed to allow you
to set the programmable features of your radio. Correctly
following these steps results in a minimal amount of radio setup
programming time.
During setup programming, the matrix display will show text
describing the programming action you are now performing.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
When in any of the Setup modes ( Marine (VHF), GMRS or
Weather ), if you stop programming for longer than
15 seconds, your entry will be saved and the radio will go
back to
Standby mode. While in the Setup mode,
you will not receive any signal reception except when setting
squelch.
Programming these features will allow you to customize certain
features of this radio to enhance your “On-Water” radio use.
Start from
Marine Standby mode to begin Marine (VHF) Setup
programming. Press and hold the Call/Enter/Setup button for
two (2) seconds to enter the programming mode.
The mode programming follows this sequence:
n
Squelch Level Set
n
UIC Channel Map
n
VOX On/Off
n
Vox Sensitivity Level Set (this menu setting will be
present when VOX is set to ON)
n
Call Alert Tone/Vibrate Set
n
Call Alert Tone Set
n
Roger Beep On/Off
n
Key Tone On/Off
n
Rewind On/Off
n
Priority 16 On/Off
Marine (VHF) Mode Programming
VHF Marine Radio Protocols
26 English
Getting Started
High/Medium/Low (H-M-L) Power Button
Your radio can transmit selectively at 1, 3 or 6 (or highest allowed
ERP setting in GMRS mode) watts of power. Cobra suggests you
maintain the low power setting for short-range communications.
You will conserve battery life and avoid overpowering nearby
stations with a low power setting signal. Use the high power
setting for long-range communications or when you do not
receive a response to a signal sent at 1 watt.
To Toggle Between H-M-L Power Modes:
Press and release the H-M-L Power button. The LCD
will show which mode is in effect. Some channels are
restricted for a maximum use of 1 watt. Your radio will
automatically set the power to
Low Power
mode
when you select those channels.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Some channels, frequency bands and countries of use
might not be able to operate in
High Power mode and
some channels are receive only.
Call/Enter/Setup Button
The
Call/Enter/Setup
button has multiple functions. It is
generally used in the following ways:
n
Press and release to transmit your unique Call Tone signal to
another radio.
n
Press and hold to enter any Setup menu.
n
Functions as an Enter button when making a selection
in any Setup menu.
MEM SAME VOX HI
ROG
VHF
GMRS
T
RX
U
H-M-L Power Button
MEM SAME VOX HI
ROG
VHF
GMRS
T
RX
U
Call/Enter/Setup Button
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
U
Marine Standby Mode
Channel 16/9 Button
•
Channel 16/9 mode gives you quick access to calling Channel
16 and Channel 9 from any operational mode.
To Switch to Channel 16 or Channel 9:
1.
Press the
Channel 16/9
button to change to
Channel 16.
2. Press the Channel 16/9 button again to change to
Channel 9.
3. Press the Channel 16/9 button a third time and return to
the last used channel.
LO
RX
U
LO
RX
U
Channel 16 or Channel 9