background image

To Illuminate Display

– Press and release the LIGHT/MAX RANGE button to illuminate the display for 10 seconds.

Auto Squelch/Maximum Range Extender

Your microTALK

®

radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise

resulting from terrain, conditions or from reaching your maximum range limit.
You can temporarily turn Off Auto Squelch or turn On Maximum Range Extender, allowing all signals to be received and
extending the maximum range of your radio.

To Temporarily Turn Off Auto Squelch:

– Press the LIGHT/MAX RANGE button for less than five (5) seconds.
If you hear two (2) beeps, you have turned the Maximum Range Extender On (see below).

To Turn Maximum Range Extender On:

– Press and hold the LIGHT/MAX RANGE button for at least five (5) seconds until you hear two (2) beeps,

indicating that the Maximum Range Extender is On.

To Turn Maximum Range Extender Off:

– Press and release the LIGHT/MAX RANGE button or change channels.

microTALK

®

Range

Your microTALK

®

radio has a range of up to 5 kilometres (3 miles).

Your range will vary depending on terrain and conditions.

In flat, open country, your radio will operate at maximum range.
Buildings and foliage in the path of the signal can reduce the range.
Dense foliage and hilly terrain will further reduce the signal.

Remember, you can achieve maximum range by using Maximum Range Extender.
See above for details.

External Speaker/Microphone/Charge Jack

Your microTALK

®

radio can be fitted with an optional external speaker/microphone (not included), freeing your hands for

other tasks.

To Attach the External Speaker/Microphone or Charger:

1. Open the charge tab on top of the radio.
2. Insert the plug into the jack.

English

OPERATION

Maximum Range

Light/Max Range
Button

External Speaker
Microphone/
Charge Jack

Light/Max Range
Button

Reduced Range

Reduced Range

Содержание microTALK 650













Отзывы: