Cobra IG32ESI, Руководство пользователя

Страница: 19 / 40

<<16>>
•
For continuous operation, do not exceed the
rated out-put power of generator.
•
Do not make parallel connection with other
generators.
• Do not connect an extension to the exhaust pipe.
• When an extension cable is required, be sure to
use a tough rubber sheathed flexible cable
(according to IEC245 or equivalent standards).
The maxmim length of the
2
extension cable: 60m for cable of 1.5mm ;
2
100m for cable of 2.5mm .
•
Keep away from other electric cables or wires.
WARNING
NOTE
•
The
DC
receptacle can be used while the
AC
power is in use. If both are used at the same
time, be sure not to exceed the total power for
AC
and
•
(AC:2.6kVA, DC:5A)
• Most of motor appliances require more than
their rated wattage, when starting.
6.1) DC Application
The DC receptacle, 15-30V under no load condition,
may be used for charging 12V battery only.
NOTE
In DC operation, turn the
ECON SW
to the
“OFF” ( ) position.
6.1.1) Disconnect the vehicle battery ground cable
from the negative battery terminals.
6.1.2) Connect the DC terminals to battery
terminals with the charging cable
CAUTION
Connect red lead to positive battery terminal and
black lead to negative battery terminal.
6.1.3) Turn ECON SW to “OFF” ( ) position and
then start engine