12 / Instruction Manual
3.2.1 Starting the hedge trimmer
3.2.2 Stop the hedge trimmer
3.2.3 Use of the rotary handle Only available on model
H60E
- Fully unroll the power cord and use the cable hook to hang and connect it to the
machine as shown in Figure 1 below.
- Connect the extension cord to the power socket, taking care to
not
press any butto
n
to
prevent accidental starting.
- Remove the protective sleeve.
- Hold the hedge trimmer firmly with both hands and simultaneously squeeze the
trigger on the rear handle with your right hand and the left hand pressing the front
handle safety switch forward as shown in Figure 2 below.
- Release the front handle safety switch and / or rear handle trigger to stop the
machine
- The machine stops completely after a few seconds.
- Unplug the power socket for safety
- To facilitate the use of hedge trimmers in vertical sections, the rear handle is adjustable
to 45 ° and 90 ° to the right and left.
- Note: Unplug the machine before
rotating
the throttle grip.
- With your thumb, pull holding the lock button rearward to unlock the handle and
rotate
to the right or to the left
to the required position.
Fig 1
Fig 3
Fig 2
