8
Parts List and
Tools Required
Tongue Support
Tongue
Assembly
Using diagram A for reference, remove the
1.
two outer 3-1/2" bolts from the dump lever
assembly.
NOTE:
Unhook the spring from the dump
lever using a pliers to easily remove the
bolt if desired. See the circle in diagram A.
Position the tongue assembly, with the
2.
tongue support facing up as shown in the
diagram to the right, into the dump lever
assembly.
Align the bolt holes and secure in place
3.
using the same 3-1/2" bolts removed earlier
in Step 1. See diagrams B, C, and D.
NOTE:
Reinstall the spring as shown
below. Verify that one end is hooked to the
dump lever and the other is secured by the
bolt. See diagram D.
ATTACH TONGUE ASSEMBLY
Flat Screwdriver
10M Socket Wrench
Tongue Assembly (1)
Tongue Support
Pliers
A
B
C
D
COBRA CARTS AND TRAILERS - INSTRUCTION MANUAL
