7
MAINTENANCE & SERVICE
6
TROUBLESHOOTING GUIDE
7
Maintaining Your
Inverter
Your CPI 200 requires very
little maintenance to keep
it operating properly. The
exterior of the unit should
be cleaned periodically with
a damp cloth to prevent
accumulation of dust and dirt.
Keep vents and fans free from
dust or debris.
Service
You can receive technical
assistance with your unit
through one of our customer
support services:
• Automated Help Desk
is available 24 hours a day,
7 days a week at
773-889-3087.
• Customer Service Operators
are available at
773-889-3087
Monday through Friday,
8:00 a.m. to 6:00 p.m.
Central Time.
• Questions can be faxed
to 773-622-2269.
• Automated Technical
Assistance
is available
24 hours, 7 days a week
via e-mail at:
[email protected].
• On-line answers
to
frequently asked questions
can be found at:
www.cobra.com.
Cobra®, Nothing Comes
Close to a Cobra® and the
snake design are registered
trademarks of Cobra
Electronics Corporation, USA.
8
WARNING
: This product contains lead, a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands after handling
.
Problem/
Possible Solution
Symptom
Causes
Low output voltage
Overload
Reduce the load.
No output voltage
Low input
Recharge battery.
voltage
Check connections
and cable.
No output voltage High input
Make sure the inverter
and "fault"
voltage
is connected to a
indicator is lit
12 volt battery.
Check regulation of
charging system.
No output voltage
Thermal
Allow inverter to cool down
when load is in
shutdown
Improve ventilation—
excess of 200 watts
make sure ventilation
or 1.3 amperes
openings in the inverter
are not obstructed. Lower
ambient temperature.
10271_CPI200CH_vB.qx 8/14/07 12:51 PM Page 8
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
