4
2
QUICK CHECKOUT
3
The location where you should
use your CPI 200 must be:
•
dry
–Do not use the unit
where water can drip or
splash on it.
•
cool
–Ambient air
temperature should be
between 30˚ and 105˚ F
(0˚ and 40˚ C). The cooler
the better.
•
ventilated
–Allow at least
1 inch (3 cm) of clearance
around the unit for proper
air flow. Make sure that
ventilation openings on the
ends of the unit are not
obstructed.
To prevent fire, do not cover
or obstruct ventilation
openings.
The inverter must only
be connected to batteries
with a nominal output
voltage of 12 volts.
It will not work with
a 6 volt battery, and
will be damaged if it is
connected to a 16 volt
or greater battery.
CAUTION
CAUTION
OPERATION
3
Quick Checkout
(continued)
To connect your inverter
to the power source:
1.
If the power source is a DC
power supply, switch it off.
2.
Insert the cigarette lighter
plug into your vehicle’s
cigarette lighter.
3.
Press and release
power button.
4.
Connect load to AC outlet
or USB port.
5V USB Port
Power Button
AC Receptacle
Power/Fault
Indicator
Power On
Indicator
10271_CPI200CH_vB.qx 8/14/07 12:51 PM Page 4
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281