background image

-  12  - 

 

 

Fig.11A                                Fig.11B 

CAUTION: 

your mower is designed to cut normal residential grass of a height no more than 250mm.   

Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry leaves. Debris may 

build up on the mower deck or contact the engine exhaust presenting a potential fire hazard. 

6.6 FOR THE BEST RESULTS WHEN MOWING 

Clear lawn of debris:

 Be sure that the lawn is clear of stones, sticks, wire or other objects, which could be 

accidentally thrown out by the mower in any direction and cause serious injury to the operator and others as 

well as damage to property and surrounding objects.   

Avoid cutting wet grass:

 For effective mowing do not cut wet grass, because it tends to stick to the underside 

of the deck preventing proper mowing of the grass clippings.   

General Recommendations:

 Cut no more than 1/3 the length of the grass. The recommended cut for mowing 

is 1/3 the length of the grass. Ground speed will need to be adjusted so the clippings can be dispersed evenly 

into the lawn. For especially heavy cutting in thick grass it may be necessary to use one of the slowest speeds 

in order to get a clean well mowed cut. When mowing long grass you may have to cut the lawn in two passes, 

lowering the blade another 1/3 of the length for the second cut and perhaps cutting in a different pattern than 

was used the first time. Overlapping the cut a little on each pass will also help to clean up any stray clippings 

left on the lawn. The mower should always be operated at full throttle to get the best cut and allow it to do the 

most effective job of mowing.   

Clean underside of deck:

 Always disconnect the spark plug connector before undertaking any maintenance. 

Be certain to clean the underside of the cutting deck after each use to avoid a build-up of grass, which would 

prevent proper mulching. Mowing leaves. The mowing of leaves can also be beneficial to your lawn. When 

mowing leaves make sure they are dry and are not laying too thick on the lawn. Do not wait for all the leaves to 

be off the trees before you mow.   

WARNING: 

If you strike a foreign object, stop the engine. Remove wire from spark plug, thoroughly 

inspect the mower for any damage and repair the damage before restarting and operating the mower. 

Extensive vibration of the mower during operation is an indication of damage. The unit should be promptly 

inspected and repaired. 

6.7 GRASS CATCHER 

If the grass catcher is full of grass, you will need to empty and clean the grass catcher, make sure it is clean 

and ensure its meshwork is ventilated. (Fig.12) 

Содержание COBR-RM514SPC




















Отзывы: