Cobra CCDC4500, Руководство пользователя

Страница: 9 / 23

9 | P a g e
DRIVE!
Drive HD Dash Cams are designed to set and forget. After initial setup the unit will turn on and
start recording as soon as power is applied. When the Micro SD Card is full the oldest footage
will be deleted to make way for the new. If you witnes
s something that you don’t want to be
deleted simply press the Emergency Record button and it will be saved forever.
BASIC OPERATION
POWERING ON THE DEVICE
The device will power on automatically when plugged in and can also be powered by PRESSING
AND HOLDING the
On/Off button until the display activates (when connected to power).
THE MICRO SD MEMORY CARD
The device comes with a Micro SD memory card. To remove the SD card, press firmly on the SD
card to push it further into the slot. There will be a click and the SD card will pop out on
release. Extract the card and replace as necessary by inserting a card into the slot and pressing
until it locks in place. These cameras are compatible with Micro SD cards up to 64GB. Please be
sure to format the card in-camera before use. Class 10 high endurance cards from reputable
brands are recommended.
CONTINUOUS LOOP RECORDING:
Once the memory card is full, the camera will continuously overwrite the oldest footage
recorded. To protect a clip so that it will not be overwritten, press the Emergency Record
Button. The emergency record icon will show on the screen. Files can also be locked from the
playback menu in Video Playback Mode.
EMERGENCY RECORDING
An Emergency Recording is triggered when the Emergency Record Button at the top of the unit
is pressed or when the G-Sensor registers an impact. Emergency Recordings create locked files
that are not overwritten by Continuous Loop Recording. To
ensure that important footage isn’t
lost surrounding an incident, adjacent video clips are locked if the incident happens within 30
seconds of the beginning or end of a clip.
NAVIGATING MENUS
When in a menu, press or to navigate to the menu item you want and then press
to select or change the option associated with that item. Pressing at any time will
exit the menu without saving changes.
VOLUME ADJUST
Briefly press the Power/Volume button to enter the volume menu. There are 5 volume settings
and mute (no volume)
3