Cobra 2006 ECX50 Скачать руководство пользователя

Страница: 41 / 65

4. Remove the cylinder.

Muratic acid can be dangerous. Follow the manufacturers instructions closely.

5. Remove the piston clip with a scribe.
6. Remove the piston pin with a piston pin remover.

INSPECTION NOTE:

Inspect the piston for abrasions and deposits on the top and sides and clean or
replace as necessary.

INSPECTION NOTE:

Piston ring end gap should be between 0.008” (0.2 mm) and 0.020” (0.5 mm)

Splitting the Cases

1. Remove the fasteners holding the two halves of the crankcase together.
2. Separate the cases with a proper case splitting tool.

INSPECTION NOTE:

Inspect the cylinder bore for abrasions, deposits, and missing coating.

1. If abrasions: scrapes, scratches, pitting, etc… are found, replace the

cylinder.

2. If deposits are all are found

a. Clean with muratic acid.
b. Once the deposits are removed, inspect for abrasions and missing

surface coating.

i. If there are abrasions or missing coating, replace.

ii. If all looks well, the cylinder may be saved.

INSPECTION NOTE:

Inspect the cylinder head for deposits and abrasions.

1. If there are deposits they should be removed

a. Black oily deposits (indicating a rich mixture or improper oil

type/quantity) can be removed with solvent

b. Crusty deposits (indicating dirt ingestion) can be removed with

solvent and may require some scraping.

2. Abrasions

a. Pitting or erosion indicates detonation and may require cylinder

head replacement, also

Retard the ignition timing

ii.

Use a higher octane fuel

b. Missing chunks or indentations indicate broken hardware or

ingested items - replace the cylinder head.

Содержание 2006 ECX50


































































Результаты поиска

Содержание 2006 ECX50

Отзывы:

Похожие инструкции для 2006 ECX50

Бренды по названию

Популярные бренды

Cobra 2006 ECX50, Руководство по обслуживанию

Результаты поиска

Содержание 2006 ECX50

Отзывы:

Похожие инструкции для 2006 ECX50

Бренды по названию

Популярные бренды