VHF Marine Radio Protocols
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
VHF Marine Radio Protocols
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
23
Nothing
Comes Close to a Cobra
®
Advanced Operation
22 English
Advanced Operation
Dual-Watch Scan Mode
To enter
Memory
mode, press
Memory/Escape
button. The
display will show the
MEM
icon and the
Memory Channel
bank will be activated and displayed.
To Program Memory Locations:
1.
Press and hold the
Memory/Escape
button for
two seconds. The memory location number
will start flashing.
2.
Use the
Channel Up
and
Channel Down
buttons to advance
to the memory location (0-9) you want to program.
3.
Press the
Memory/Escape
button to select the
memory location. The memory channel number
will stop flashing and the channel number will
start flashing.
4.
Use the
Channel Up
and
Channel Down
buttons
to change to the channel you want to store into the
selected memory location.
5.
Press the
Memory/Escape
button to program that
channel. The memory location number will flash again.
Repeat steps 2 through 5 to program as many additional
memory locations as you want [up to ten VHF memory
channels].
6.
Press and hold the
Memory/Escape
button for
two seconds. This will return the radio to
Memory
mode.
7.
Press and release the
Memory/Escape
button
again to return to
Marine Standby
mode.
FLOATING MARINE HH150
ESC WEATHER SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL +
SUBMERSIBLE
MEM/ESC Button
Memory Location Number
FLOATING MARINE HH150
ESC WEATHER SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL +
SUBMERSIBLE
Channel Up/Down Buttons
Channel Number
Memory Location Mode
Your radio has ten memory locations (numbered 0 to 9) for your most frequently used
channels. These memory locations can be selected individually or can be scanned.
Dual-Watch Mode
Dual-Watch
mode gives you one button access to scan a total of two channels of most
importance to you. Channel 16 is preprogrammed and will always be one of the scanned
locations. The other channel can be any marine VHF channel of your choice.
Using Dual-Watch
1.
In
Marine Standby
mode, select the desired channel for
Dual-Watch scanning.
2.
Press the
Dual-Watch
button. The
DW
icon will appear
on the LCD display and the radio will scan channel 16
and the selected channel.
3.
A signal on any one of the two channels will
stop the scan for 10 seconds to allow you to listen
to the traffic on that location.
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
NOTE
After the
Dual-Watch
scan stops to monitor a channel,
as long as you do not press any buttons within 10
seconds, your radio will automatically resume scanning
the
Dual-Watch
channels.
4.
Press the
Channel Up
or
Channel Down
buttons
to resume scanning the
Dual-Watch
channels or
to change the scan direction.
5.
To EXIT the
Dual-Watch
scan, press the
Dual-Watch
button
again. The
DW
icon will disappear from the
LCD and the radio will return to
Marine Standby
mode.
NOTE
Dual-Watch
also functions with a
Memory
channel.
FLOATING MARINE HH150
ESC WEATHER SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL +
SUBMERSIBLE
DUAL-WATCH Button
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
