21
Nothing
Comes Close to a Cobra
®
MEM
SAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Roger Beep Mode
MEM
SAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Call Tone Select
VHF Marine Radio Protocols
Operating Your Radio
20 English
Setup Mode Programming
Call Tone Select
This setting will also allow you to transmit a unique
Call Tone
alert to identify your radio when you transmit
messages. You can select from one of 10 different
Call Tone
signals.
To Set Call Tone:
1.
From the previous press of the
Call/Enter/Setup
button, the matrix will display
CALL TONE SELECT
and the display will flash the current
Call Tone
number (01 through 10).
2.
Press the
Channel Up/Down
button to select a
different
Call Tone
. An example of each call tone will
sound for 1.5 seconds.
3.
Press
Call/Enter/Setup
button to save this entry and
move to the next
Setup
mode programming.
NOTE
Call Tones
are not usually used for
Marine VHF
communications. We allow you to turn it On for your
unique communication needs. It is only compatible
with other Cobra VHF radios.
Roger Beep Mode
In
Roger Beep
mode, your listener will hear an audible tone
when you release the
Talk
button. This alerts your listener
that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1.
Display will show
ROG
icon flashing and the matrix
will display
ROGER BEEP ON
or
OFF
.
2.
Press
Channel Up/Down
button to select
ON
or
OFF
.
ROG
will be displayed when On.
3.
Press
Call/Enter/Setup
button to save this entry and
move to the next
Setup
mode programming.
Key Tone Mode
In
Key Tone
mode, an audible tone will sound each time a
button is pressed or you change a setting.
To Set Key Tone On or Off:
1.
Display will show
Key Tone
icon flashing and matrix will
display
KEY TONE ON
or
OFF
.
2.
Press
Channel Up/Down
button to select
ON
or
OFF
.
3.
Press
Call/Enter/Setup
button to save entry.
VHF Marine Radio Protocols
Operating Your Radio
Setup Mode Programming
Programming these features will allow your radio to listen to
all NOAA Hazard Alert radio channels.
Start from
WX Alert Standby
mode to begin
WX Alert Setup
programming. Press and hold the
Call/Enter/Setup
button for
two (2) seconds to enter the programming mode.
To Set WX Alert On or Off:
1. WX Alert
mode is the first mode that begins
WX Alert Setup
programming. From the
WX Standby
mode, press and hold the
Call/Enter/Setup
button to enter
the
Weather
mode programming.
2.
Display will show
WX Alert
icon and flashing matrix will
display
WX ALERT ON
or
OFF
.
3.
Press
Channel Up/Down
button to select
ON
or
OFF
.
4.
Press
Call/Enter/Setup
button to save this entry and move
to the next setup programming mode.
Weather (WX) Mode Programming
MEM
SAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
WX Alert On/Off
MEM
SAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Key Tone Mode
MEM
SAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Weather Alert Standby
MRHH350W_FLT_MANL_ENG_MRHH330_ENG_Body 10/30/13 2:39 PM Page 20
