26
Tranmitter 1 – Received on Receiver 1 – Output Service Name = CRX-01
Tranmitter 2 – Received on Receiver 2 – Output Service Name = CRX-11
Tranmitter 3 – Received on Receiver 3 – Output Service Name = CRX-21
Tranmitter 4 – Received on Receiver 4 – Output Service Name = CRX-31
The user can modify the prefix, by changing the default away from ‘CRX-‘ in the
service prefix field.
If automatic service renaming is not selected, then the user must ensure
that all contributing transmitters have different service names and PIDs.
PAL / NTSC configuration
The CRX can be configured to operate outputting video in either PAL or
NTSC formats. To switch between PAL and NTSC the user must check
that the “Output video standard” setting in Engineering options
->Advanced options->Global is set to the correct video standard. Also
check the “Power-up line standard” option in each receiver’s advanced
tab. The CRX system supports PAL and NTSC but the two cannot be
mixed, so all transmissions into the unit must be the same standard to
correctly display the video.
Note: Incorrect setting of the global video standard leads to picture
distortion, rolling video and colour loss.
The Streamer Tab
The Streamer function is described in more detail in section 9,
Netstream IP Output Option.
The Rebroadcast Tab
The Rebroadcast function is described in more detail in section 10,
Microwave Relay Output Option.
