Doc. No:
GR716-DEV-QSG
Issue:
0
Rev.:
2
Date:
2019-05-02
Page:
10 of 31
Status:
Draft
Jumper
Setting
Description/Comment
clock input.
If this oscillator is installed, make sure
there is no conflict with GR716-BOARD
clock settings
X3
System crystal oscillator
Connects to the GR716 device via system
clock input.
If this oscillator is installed, make sure
there is no conflict with GR716-BOARD
clock settings
X4
PWM crystal oscillator
Connects to the GR716 device via pin
multiplexing.
If this oscillator is installed, make sure
there is no conflict with GR716-BOARD
clock settings
P1
GR716-BOARD connector
Expansion connector connected to board
via plug-on configuration boards
P2
P3
GR716-BOARD connector
Expansion connector. This connector is a
copy of P1-P2 connector but not
configurable via plug-on configuration
board.
P4
CPCI-J1 CPCI power connector
CPCI Type A connector as power
alternative
D33
RESET and POWER led
© Cobham Gaisler AB
