COBHAM EXPLORER 8100 Ku, Руководство по установке оборудования

Страница: 6 / 22

Prerequisites
2 Chapter 1: Conversion to Ku-band 98-155944-A
After unpacking the received items, inspect them thoroughly for hidden damage and loose
components or fittings. If the contents are incomplete, if there is mechanical damage or
defect, or if the system does not work properly, notify your dealer.
1.2 Prerequisites
1.2.1 Software version
Before conversion, update the ACU software to minimum version 1.58 .
1.2.2 Tools needed
The following tools are needed to convert an EXPLORER 8100 Ka (eTRIA) antenna to an
EXPLORER 8100 Ku antenna:
• Allen (hex) key set
• Torx screwdriver set
• Adjustable wrench
• Cutting pliers (for cutting cable strips)
• Scalpel (for removing tape from the SMA connector at the eTRIA)