COBHAM explorer 727, Руководство пользователя

Страница: 101 / 179

Chapter 4: To use the web interface
98-126882-F To manage LAN network users 94
Necessary steps when you manage network users
The steps necessary for managing network users include:
1.
To define a network user group.
See To set up the network user groups on page 95.
The network user groups determine settings such as:
• QoS (Standard/Streaming),
• IP addressing (Static/Dynamic)
• Internet access mode (Router Mode/Bridge Mode/No Internet Access)
2.
Identify a network device.
See To manage network devices on page 99.
The network devices are identified by their IP address, MAC address and (optionally)
device name.
3.
Associate the network user group and the network device.
See To use the network
classification table
on page 100.
The network classification table determines which devices should belong to which network
user group. When a network device is connected, the terminal runs through the network
classification table to check if the new connection matches any of the entries in the table.
When a match is found, the terminal establishes a packet data connection (PDP context)
with the settings defined in the belonging network user group, and the device is ready for
use with the terminal.
Access to the network management settings
Access to the network management settings requires an administrator password. The default
user name is
admin
and the default password is
1234
.
The administrator can create and manage network user groups and set up a network
classification table defining priorities for devices, network user groups and LAN ports.
Important
All user connections to the LAN interface may be
affected when you change the settings below,
including your own current connection.