COBHAM explorer 727, Руководство пользователя

Страница: 107 / 179

Chapter 4: To use the web interface
98-126882-F To manage LAN network users 100
To lock an IP address to a MAC address
When the device is locked to an IP address, the terminal will always assign this IP address to
the MAC address of this device (if DHCP is enabled and the Internet connection is not a Bridge
mode connection).
To lock a device to its current IP address
, click the link next to the device.
The device is then locked to the current IP address and added to the list of locked IP addresses
at the top of the page.
To unlock a device from the IP address , click Delete next to the device in the LOCKED
IP ADDRESSES
list.
To use the network classification table
Overview
The network classification table is used to define which network devices, IP addresses and/or
LAN ports are associated with which network user groups.
Each entry in the table shows MAC address, IP address, LAN port and network user group.
When a network device is connected, the terminal runs through the network classification
table to check if the new connection matches MAC address, IP address and LAN port in any of
the entries in the table. When a match is found, the terminal establishes a PDP context with the
settings of the network user group assigned in the matching entry. The device is now ready for
use with the terminal.
To add or edit an entry in the network classification table
To add a new entry to the table or to edit an existing entry, do as follows:
1. Select
SETTINGS > LAN > Network classification table
.
If you are prompted, enter the administrator user name and password. The default user
name is
admin
and the default password is
1234
.
The network classification table shows which devices are associated with which LAN ports
and network user groups. An Asterisk (*) is a “wild card”, meaning that any value is
accepted.