COBHAM explorer 727, Руководство пользователя

Страница: 102 / 179

Chapter 4: To use the web interface
98-126882-F To manage LAN network users 95
To set up the network user groups
Overview
A network user group, in this context, is a group of network users who share the same Quality
of Service profile and network parameters.
There are 11 configurable network user groups. For the Default network user group certain
settings are locked to make sure there is always one functional network user group available.
For example, the Default network user group cannot be disabled and does not allow you to
select a Bridge mode connection.
To edit a network user group
For further explanation of the terms used below, see Definitions for network terms on
page 103.
To edit a network user group, do as follows:
1. Select SETTINGS > LAN > Network user groups .
When you are prompted, enter the administrator user name and password. The default
user name is
admin
and the default password is
1234
.
2. Click Edit next to the network user group you want to set up.
Note
The network user groups cannot be deleted. If you do not want to use them, click
Edit
and select
Disabled
at
Status
in the
NETWORK USER GROUP
field.