COBHAM Explorer 710, Руководство пользователя

Страница: 159 / 181

Appendix B: Command reference
98-140012-H AT commands 150
AT commands
The following most used AT commands are explained in this manual. Other AT commands not
mentioned here may still be supported.
Syntax conventions
Syntax definitions use the following conventions:
• <parm> indicates that a parameter (without < and > ) can be filled in by the user.
• { <opt1> | <opt2> | … } indicates that one of various options must be chosen by the user.
• [<options>] indicates that <options> may or may not be included in the command.
• Keywords and parameters are separated by commas.
Note: If parameters in the middle are left out, the commas must still be there as
placeholders, e.g.
<parm1>,,,<parm4> - In this case parm 2 and parm 3 are left out,
but <parm4> is used. If the last parameters are left out, the commas are not needed, e.g.
<parm1>,<parm2>
• The command name and all keywords must be in upper case; most user-provided
parameters are case sensitive but may be either case.
•
TE
means Terminal Equipment - the equipment connected locally to the EXPLORER 710.
Note
AT commands related to data connections are only applicable to the BGAN
connection, not to the optional cellular connection.