16
6.27.6.2
Delete area
Send SMS command:"pspace+area name” to tracker, it will reply:"noarea ok".
6.27.6.3
rename and set distance
Send SMS command "pspace+old name;new name,distanceM" to tracker, if name
is not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration.
Example: Send"rename123456 area01;school,800M", it means the new area name is "school", and covers
area of a radius of 800 meters.
6.27.6.4
Activate multi-area management
Send SMS command "area+pspace+on" to tracker, it will reply "Area on ok!", when tracker
enter the pre-set area, it will send SMS "area name+latitude & longitude" to all the authorized phone
number, and send same SMS when goes out of the area.
6.27.6.5
Deactivate Multi-area management
Send SMS command "area+pspace+off" to tracker, it will reply"area off ok!
6.27.7
Movement alarm
Set up: when the unit stays immobile in a place for 3-10 minutes with GPS signal reception, the user can
send SMS“move+pspace+0200” to the tracker (Suppose area of a radius of 200 meters, it
supports 4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a movement (the default
distance is 200m), it will send SMS “Move+ latitude & longitude” to the authorized numbers at interval of
3 minutes.
Cancel: Send SMS “password” to deactivate the movement alarm.
6.27.8
Overspeed alarm
Set up: Send SMS command “speed+pspace+080” to the unit (suppose the speed is 80km/h),
and it will reply “speed OK!”. When the target moves exceeding 80km/h, the unit will send SMS
“speed+080!+ latitude & longitude” to the authorized numbers ,it will only send one SMS in 3
minutes in SMS mode when overspeed ; the siren will beep 1 time when overspeed 1 time.
Cancel: Send SMS “password” to deactivate the overspeed alarm.
Note: The recommended speed should be not less than 30km/h. For below that rate, it will be effected
the accuracy by GPS signals drift etc.
6.27.9
Fuel Alarm
When the fuel consumption exceeds the normal standards during driving, or oil theft/leakage when
