Cobalt Digital Inc OG-PC-x86-A, Руководство по эксплуатации продукта, Страница: 23 / 26

OG-PC-X86A-OM (V1.0) OG-PC-X86-A PRODUCT MANUAL
3-5
Setup Instructions
DashBoard Remote Control of OG-PC-x86-A
DashBoard Remote Control of OG-PC-x86-A
When the frame hosting an OG-PC-x86-A is connected to DashBoard,
hardware control features such as power on/off, reset, and sleep are accessible
via DashBoard remote control. This circumvents needing to be collocated
with the frame/PC to execute these functions.
In Case of Problems
Contact and Return Authorization
Should any problem arise with this product that was not solved by the
information in this section, please contact the Cobalt Digital Inc. Technical
Support Department.
If required, a Return Material Authorization number (RMA) will be issued to
you, as well as specific shipping instructions. If required, a temporary
replacement item will be made available at a nominal charge. Any shipping
costs incurred are the customer’s responsibility. All products shipped to you
from Cobalt Digital Inc. will be shipped collect.
The Cobalt Digital Inc. Technical Support Department will continue to
provide advice on any product manufactured by Cobalt Digital Inc., beyond
the warranty period without charge, for the life of the product.
See Contact Cobalt Digital Inc. (p. 1-7) in Chapter 1, “Introduction“ for
contact information.
Provides DashBoard controls to remotely control
OG-PC-x86-A hardware functions.
• Output Format Select
• Sleep invokes sleep when pressed, and toggles to awake/active when pressed
again.
• Power Toggle behaves the same as a normal power button press (such as when
routinely powering-up or powering-down the PC). The PC will start its shutdown
procedure, eventually fully shutting down. After full shutdown, the button can be
pressed again to again start the PC.
• Long Power Toggle behaves similarly to holding a hardware power button “in” for
eight seconds for a non-graceful immediate power-down. The immediate power-off
may or may not give the OS enough time to complete its normal power-down
sequence. Long Power Toggle can be done if there is a crash to the OS which
makes the PC unresponsive to the “normal” Power Toggle button press. To again
power-up/start the PC, press the Power Toggle button.
• Reset functions identically to the hardware Reset button.