BBG1002UDX-OM (V1.5)
BBG-1002-UDX PRODUCT MANUAL
3-21
Setup/Operating Instructions
BBG-1002-UDX Function Menu List and Descriptions
Input Audio Routing/Controls
Provides audio routing, gain, per-channel/bulk audio
delay controls, and audio meters. These controls route
selected audio sources onto the 16-channel internal
bus (which is used for all audio processing).
Table 3-2
BBG-1002-UDX-UDX Function Menu List — continued
All audio inputs are transferred through the
device via the 16-channel Internal Bus (Bus Ch
1 thru Bus Ch 16).
The example above shows various Source
selections that direct Emb Ch 1 thru Ch 6 and
AES Ch 1 and Ch 2 onto the device internal bus
(unused bus channels can be set to Silence or
Mute).
Each bus channel provides Gain, Mute, and
Invert controls.
The source-to-destination correlation shown
here is only an example; any of the sources
described on the following pages can route to
any of the internal bus channels.
Bus Ch 1
Bus Ch 2
Bus Ch 3
Bus Ch 4
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
•
•
•
Bus Ch 16
Silence
or Mute
AES Ch 1-2
Emb Ch 1 – 6
Input Audio
Crosspoint
16-Ch Internal Bus
(Gain, Mute, Bulk and
Channel Delay Controls)
