Cobalt Digital Inc 9922-FS Скачать руководство пользователя страница 38

Страница: 38 / 118

Installing a Rear I/O Module

2-8

9922-FS PRODUCT MANUAL

9922FS-OM (V1.5)

RM20-9922-FS-J

Provides the following connections:

• Two 3G/HD/SD-SDI video input BNCs (SDI IN A

and SDI IN B)

• One SDI/CVBS video input; selectable as 3G/HD/

SD-SDI or CVBS (D/CVBS IN)

• Four analog balanced audio inputs (AN-AUD IN 1

thru AN-AUD IN 4)

• Two AES audio inputs (AES IN 1 and AES IN 2)

• Four 3G/HD/SD-SDI video outputs, selectable as

processed or reclocked input (SDI OUT 1 thru
SDI OUT 4)

• One CVBS video output (CVBS OUT)

• Four analog balanced audio outputs

(AN-AUD OUT 1 thru AN-AUD OUT 4)

• Two AES audio outputs (AES OUT 1 and

AES OUT 2)

• One GPI / 6Hz coaxial input (GPI 1)

• One coaxial GPO with isolated return (GPO 1)

Note: Available equipped with High-Density BNC

(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9922-FS-J-HDBNC or
RM20-9922-FS-J-DIN, respectively.

RM20-9922-FS-K

Provides the following connections:

• Four 3G/HD/SD-SDI video inputs (SDI IN A thru

SDI IN D; IN D-to-OUT 1 as passive RLY bypass)

• SIx AES audio inputs (AES IN 1 thru AES IN 6)

• Two analog balanced audio inputs (AN-AUD IN 1

and AN-AUD IN 2)

• Four 3G/HD/SD-SDI video outputs (SDI OUT 1

thru SDI OUT 4)

• Four AES audio outputs (AES OUT 1 thru

AES OUT 4)

• COMM/GPIO RJ-45 connector

Note: • Refer to GPIO, Serial (COMM), and Analog

Audio Connections (p. 2-11) for connector
pinouts and important information regarding
GPO electrical limits.

• Available equipped with High-Density BNC

(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9922-FS-K-HDBNC or
RM20-9922-FS-K-DIN, respectively.

1934D

Table 2-1

9922-FS Rear I/O Modules — continued

9922-FS Rear I/O Module

Description

Note: Refer to GPIO, Serial (COMM), and

Analog Audio Connections (p. 2-11) for
connector pinouts and important
information regarding GPO electrical
limits.

Содержание 9922-FS























































































































Результаты поиска

Содержание 9922-FS

Отзывы:

Cobalt Digital Inc 9922-FS, Руководство по эксплуатации продукта, Страница: 38 / 118

Результаты поиска

Содержание 9922-FS

Отзывы: