Cobalt Digital Inc 3G Fusion 9931-DE Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 124

background image

9931-EMDE-OM (V1.17)

9931-EMDE PRODUCT MANUAL

1-7

Introduction

9931-EMDE Functional Description

9931-EMDE Video and Audio Options

In addition to the I/O options described in Table 1-1 above, the 9931-EMDE
offers several video and audio options described in Table 1-2. Note that
several options also require a rear I/O option that supports the video and/or
audio options described here; the complete option requirement is specified in
Table 1-2.

SDI OUT A

3G/HD-SD-SDI BNC video output

Standard

❑

Various Rear Modules offer various

SDI BNC output complements.
See 9931-EMDE Rear Modules
(p. 2-7) for more information.

Note: The input/output complement listed above and shown in Figures 1-2 and 1-5 represents the maximum capability of the

9931-EMDE. The practical input/output complement is determined by the particular Rear Module used with the 9931-EMDE.
Not all options are available concurrently on a single card.

Table 1-1

9931-EMDE Video/Audio Signal Types — continued

Signal ID

Description

Option/Rear Module

Package Required

Table 1-2

9931-EMDE Video/Audio Options

Option

Description

Option/Rear Module Package

Required

Note: Options are periodically added for this card. Check for latest options on the card web page at cobaltdigital.com. Most

options, in addition to licensing, require that card be loaded with the latest available firmware.

Video Options

Color Correction

In addition to standard video proc controls,
provides independent RGB channel controls
for luma, black, and gamma.

• Option +COLOR

Audio Options

Linear Acoustic

®

Loudness

Processing software

Linear Acoustic

®

AEROMAX

®

5.1-channel or

stereo audio output loudness processing;
several combinations available

• Option +LP51 (5.1-Ch loudness

processing)

• Option +2LP20 (dual independent

stereo loudness processing)

• Option +LP20 (stereo loudness

processing)

OGCP Loudness Meter
software
(Note 1)

5.1-channel loudness meter in accordance with
EBU R128, ATSC A/85 and ITU BS.1770.
Allows OGCP-9000 to provide user interface.

• Option +LM

Linear Acoustic

®

Upmixing

software
(Note 2)

Linear Acoustic

®

AUTOMAX™ converts legacy

stereo program audio (from any source
received by the card) to 5.1-channel audio.

• Option +UM

Automatic Downmixing

Provides a stereo downmix from selected
alternate multi-channel sources if selected
primary L/R channels lose signal.

• Option +ADM

«
...
9
10
11
12
13
...
»

Содержание 3G Fusion 9931-DE





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 3G Fusion 9931-DE

Vb-C60 - Ptz Network Camera

Бренд: Canon Страницы: 30

Бренд: Omnia Страницы: 102

Бренд: Datasat Страницы: 32

Бренд: Campbell Страницы: 42

Бренд: Harman Kardon Страницы: 66

ILDA Gem Laser projector tool

Бренд: Stanwax Laser Страницы: 3

Бренд: Uniden Страницы: 5

Бренд: Caton Страницы: 18

Бренд: Cypress Semiconductor Страницы: 33

Masterliquid ML240L RGB

Бренд: Cooler Master Страницы: 18

Бренд: Trend Micro Страницы: 2

Broadband 700 MHz

Бренд: Alcatel-Lucent Страницы: 8

Бренд: Rajant Страницы: 93

Бренд: AJA Страницы: 129

Бренд: MikroTik Страницы: 4

Бренд: CAMBRIONIX Страницы: 40

Бренд: Eagle Eye Страницы: 61

Бренд: VIA Technologies Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды