Cobalt Digital Inc 3G Fusion 9921-FS Скачать руководство пользователя страница 121 | Manualshive

Страница: 121 / 128

background image

9921-FS-OM (V1.18)

9921-FS PRODUCT MANUAL

3-67

Operating Instructions

Troubleshooting

Basic Troubleshooting Checks

Failures of a general nature (affecting many cards and/or functions
simultaneously), or gross inoperability errors are best addressed first by
performing basic checks before proceeding further. Table 3-3 provides basic
system checks that typically locate the source of most general problems. If
required and applicable, perform further troubleshooting in accordance with
the other troubleshooting tables in this section.

9921-FS Processing Error Troubleshooting

Table 3-4 provides 9921-FS processing troubleshooting information. If the
9921-FS card exhibits any of the symptoms listed in Table 3-4, follow the
troubleshooting instructions provided.

In the majority of cases, most errors are caused by simple errors where the
9921-FS is not appropriately set for the type of signal being received by the
card.

Note:

The error indications shown below are typical for the corresponding error con-
ditions listed. Other error indications not specified here may also be displayed
on DashBoard™ and/or the 9921-FS card edge status indicators.

Note:

Where errors are displayed on both the 9921-FS card and network remote
controls, the respective indicators and displays are individually described in
this section.

Table 3-3

Basic Troubleshooting Checks

Item

Checks

Verify for power presence

On both the frame Network Controller Card and the 9921-FS, in all cases when power
is being properly supplied there is always at least one indicator illuminated. Any card
showing no illuminated indicators should be cause for concern.

Check Cable connection
secureness and connecting
points

Make certain all cable connections are fully secure (including coaxial cable attachment
to cable ferrules on BNC connectors). Also, make certain all connecting points are as
intended. Make certain the selected connecting points correlate to the intended card
inputs and/or outputs. Cabling mistakes are especially easy to make when working
with large I/O modules.

Card seating within slots

Make certain all cards are properly seated within its frame slot. (It is best to assure
proper seating by ejecting the card and reseating it again.)

Check status indicators and
displays

On both DashBoard™ and the 9921-FS card edge indicators, red indications signify an
error condition. If a status indicator signifies an error, proceed to the following tables in
this section for further action.

Troubleshoot by substitution

All cards within the frame can be hot-swapped, replacing a suspect card or module
with a known-good item.

«
...
119
120
121
122
123
...
»

Содержание 3G Fusion 9921-FS

































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3G Fusion 9921-FS

Бренд: GlobespanVirata Страницы: 12

Бренд: ICP DAS USA Страницы: 8

Бренд: CSL Страницы: 32

Бренд: Diablotek Страницы: 1

Бренд: Echo Страницы: 48

Sun Flash Accelerator F80

Бренд: Oracle Страницы: 60

Бренд: NetComm Страницы: 36

Бренд: Gbord Страницы: 10

Бренд: SENAO Страницы: 33

Бренд: Merz Страницы: 40

Бренд: Masterclock Страницы: 12

Бренд: SIIG Страницы: 2

FireWire PCI Adapter

Бренд: Western Digital Страницы: 15

Бренд: US Robotics Страницы: 2

Бренд: SeaLevel Страницы: 19

Бренд: Kontron Страницы: 2

Бренд: Kontron Страницы: 13

DIMM-PC/ETH+COM

Бренд: Kontron Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды