Configuration
CoaXPress MC258x Camera Manual
6.3.7 AcquisitionFrameRate
Description: Controls the acquisition rate (in Hertz) at which the frames are captured.
Access
Read / Write
Type:
Unsigned Integer
In:
1 … AcquisitionFrameRateMax
Out:
AcquisitionFrameRate
Remark:
To capture continuously frames with the selected frame rate the camera must be in continuous
mode.
6.3.8 AcquisitionFrameRateMax
Description: This feature returns the max. possible frame rate in dependency of the current camera settings.
Access
Read
Type:
Unsigned Integer
In:
-
Out:
Max. frame rate
Remark:
The max. frame rate depends on the currently defined frame size, on the used link speed and on
the number of CoaXPress lines used for image streaming.
6.3.9 TriggerSelector
Description: This feature selects the trigger type to configure.
Access
Read / Write
Type:
Enumeration
In:
Enumeration
Description
FrameStart
If FrameStart is selected the camera will take one picture per trigger signal.
FrameBurstStart
Selects a trigger that starts the camera to capture a sequence of frames on the occurrence
of a trigger signals. The number of frames captured is defined by the feature
'Acquisition
BurstFrameCount'.
controls the length of each burst unless a
FrameBurstEnd trigger is active.
Out:
-
Remark:
Set feature 'AcquisitionBurstFrameCount' to define the number of frames to capture if 'Frame
BurstStart' is selected.
28
